Swingarm Aluminum Spools By 66BHP
The Spools are tested thoroughly as per the set industrial quality guidelines. We product parts that are durable, anti-corrosive, high in strength and abrasion resistant.
- Used for Spool Mount Compatible Rear Paddock Stands.
- Provides better balance and stability than Swingarm Mounted Paddock Stands.
- Made from Billet Aluminium, CNC Machined & Anodised for premium & durable surface coating.
- Stainless Steel Bolts included.
- Sold in Pair.
| Finish Type | Anodised |
| Metal Type | Aluminium |
| Handle Material | Aluminium |
Remove the spool (optional, but gives a more accurate measurement).
Measure the total length from the base (where it sits against the swingarm) to the outermost edge.
If using a vernier caliper, use the depth gauge or outside jaws.
If using a ruler, place it flat against the base and read the measurement at the end.
Note down the measurement in millimeters (mm).
📝 Optional Additional Measurements:
Thread length: Measure only the threaded portion.
Thread diameter: To ensure compatibility with your swingarm (usually M6, M8, or M10).
Base width/diameter: Useful if clearance is tight around the swingarm.
The Spools are tested thoroughly as per the set industrial quality guidelines. We product parts that are durable, anti-corrosive, high in strength and abrasion resistant.
- Used for Spool Mount Compatible Rear Paddock Stands.
- Provides better balance and stability than Swingarm Mounted Paddock Stands.
- Made from Billet Aluminium, CNC Machined & Anodised for premium & durable surface coating.
- Stainless Steel Bolts included.
- Sold in Pair.
| Finish Type | Anodised |
| Metal Type | Aluminium |
| Handle Material | Aluminium |
Remove the spool (optional, but gives a more accurate measurement).
Measure the total length from the base (where it sits against the swingarm) to the outermost edge.
If using a vernier caliper, use the depth gauge or outside jaws.
If using a ruler, place it flat against the base and read the measurement at the end.
Note down the measurement in millimeters (mm).
📝 Optional Additional Measurements:
Thread length: Measure only the threaded portion.
Thread diameter: To ensure compatibility with your swingarm (usually M6, M8, or M10).
Base width/diameter: Useful if clearance is tight around the swingarm.
Description
The Spools are tested thoroughly as per the set industrial quality guidelines. We product parts that are durable, anti-corrosive, high in strength and abrasion resistant.
- Used for Spool Mount Compatible Rear Paddock Stands.
- Provides better balance and stability than Swingarm Mounted Paddock Stands.
- Made from Billet Aluminium, CNC Machined & Anodised for premium & durable surface coating.
- Stainless Steel Bolts included.
- Sold in Pair.
| Finish Type | Anodised |
| Metal Type | Aluminium |
| Handle Material | Aluminium |
Remove the spool (optional, but gives a more accurate measurement).
Measure the total length from the base (where it sits against the swingarm) to the outermost edge.
If using a vernier caliper, use the depth gauge or outside jaws.
If using a ruler, place it flat against the base and read the measurement at the end.
Note down the measurement in millimeters (mm).
📝 Optional Additional Measurements:
Thread length: Measure only the threaded portion.
Thread diameter: To ensure compatibility with your swingarm (usually M6, M8, or M10).
Base width/diameter: Useful if clearance is tight around the swingarm.